Integrating in-situ monitoring data and slope stability analysis for a new empirical slope failure warning criteria

  • Author(s): Kuo-Jung Wang, Der-Her Lee, Yun-Che Chen, Jian-Hong Wu, Zhi-Ren Tseng, and Charng-Hsein Juang
  • DOI: 10.3319/TAO.2021.03.29.01
  • Keywords: Alishan Highway Groundwater level Rainfall Slope failure Warning criteria
  • Citation: Wang, K.-J., D.-H. Lee, Y.-C. Chen, J.-H. Wu, Z.-R. Tseng, and C.-H. Juang, 2021: Integrating in-situ monitoring data and slope stability analysis for a new empirical slope failure warning criteria. Terr. Atmos. Ocean. Sci., 32, 171-189, doi: 10.3319/TAO.2021.03.29.01
  • Slope stability is evaluated by the limit equilibrium method
  • Relationship between rainfall and groundwater level is assessed
  • The rainfall-based slope failure criteria are developed
Abstract

This study investigated a highway slope 2 km ahead of the entrance of the Alishan National Forest Recreation Area, at the mileage of 86 km and 950 m of the Alishan Highway, Taiwan. Countermeasures were conducted after a slope failure. Groundwater wells and inclination wells were installed on the slope. The new idea to improve the accuracy of the empirical rainfall-based criteria comes from developing the relations between rainfall and groundwater fluctuation by analyzing the local groundwater elevation and the rainfall data at the Alishan rainfall station. The potential failure surfaces for shallow collapse and deep-seated landslide in the slope and the relationships between the slope stability and the groundwater level were assessed using Geo-Studio. The variation of the groundwater level with the critical state of the slope were obtained. Based on the analysis results, in each kind of potential failure of shallow collapse and landslide, the total cumulative rainfall (ΣR) corresponding to three slope stability states were determined: (1) safe, slope is stable, (2) dangerous, slope is possible failure (0 < failure possibility < 100%), and (3) disaster, slope will failure (failure possibility = 100%). Finally, combine the three slope stability states for the shallow collapse and the deep-seated landslide, a rainfall-based slope failure warning criteria for the test slope on the Alishan Highway is set up to operate in five stages: (1) safety (ΣR < 440 mm), (2) alert (440 mm ≤ ΣR < 580 mm), (3) evacuated (580 mm ≤ ΣR < 850 mm), (4) disaster (850 mm ≤ ΣR < 990 mm), and (5) catastrophe (990 mm ≤ ΣR).

Read 1805 times
© 1990-2033 Terrestrial, Atmospheric and Oceanic Sciences (TAO). All rights reserved.

Published by The Chinese Geoscience Union